Clarinet stand - two parts (print in place)
This is a two-piece clarinet stand which folds up so it can be stored in the clarinet bell. Print in place.
59
726
8
2194
updated
February 12, 2024
Model files
outer 0.5mm stl
inner 0.5mm stl
outer 0.4mm stl
inner 0.4mm stl
outer 0.3mm stl
inner 0.3mm stl
clarinet stand 0.5mm step
Clarinet stand 0.4mm step
Clarinet stand 0.3mm step
Clarinet stand 0.5mm f3d
Model origin
The author remixed this model.
Differences of the remix compared to the original
I added chamfers to the base of the feet to prevent them from flopping down when picking up the stand. If the stand is stuck to the clarinet bell, picking it up will not allow the feet to fall inwards, but because the feet still stick outward, you can easily put the clarinet and stand down again.
I also made the feet a little broader and thicker for more support of the clarinet. I improved the hinge design so print-in-place parts have no overlap and will come apart easily after printing.