Nice, exactly what i need to increase temp and Z axis. Wish the knob would be slightly bigger for better grip
Ender 3 V3 SE knob
This is a (speed) knob for the Ender 3 V3 SE.
90
502
5
2676
updated
April 5, 2024
Makes
Comments
I think some will understand that I know that they know that I know that they know. This handle is exactly what I was looking for to quickly reach the 999% speed setting lets gooooooooooo
Excellent design, other than 1 minor, easily user-mendable flaw: it's slightly oversized. I printed it out of PETG-CF, which, while less prone to shrinkage than standard PETG, still generally experiences just over a 1% shrink-rate. A small dab of hot glue on the insert gave it the adhesion it needed to stay in place, but I'd recommend downscaling by around 2-3% outside of the required calibration for your filament's flow-rate.
Still deserving of a 9/10.
@Tarnishd_2808671 Thank you!
(deleted)
Works amazingly, and looks cool.
(deleted)
@Douglas_1753670
Thanks, I try my best to help you. :p
Is the first Picture how it fits?
Which version did you print?
@Douglas_1753670
So, I made both again to check.
The green is the version 2, its a little bit higher as you can see. For me it fits good, a little bit hard, but still good.
The white is the version 1, which I guess you already printed.
You need to remove the original knob and then put the printed one with the middle hole on the metal piece.
! Reminder, also in the middle whole are some supports you need to remove them.
Maybe this was your problem…
Please let me know if it solved your issues.
Just push it on the thing as hard as you can. (edited)
View 5 more comments