Nerf Retalicon Super Pump Kit

Super pump kit for Nerf Retaliator and Recon

Should work with all other side prime or bolt blasters such as the tri strike

Hardware Required

200mm x 20mm PVC pipe (27mm OD). x2

3mm Self Tapping screws x2

M4x6 Bolt x2

M4 Nut x2

Any aluminium bar ~12x3mm x 180mm or 1/2"x1/8" x 7.5"

Glue

Instructions

Step 1. Insert the m4 nuts into the hole in the bolt carrier by heating them up with soldering iron and using them as heat set insert.

Step 2. Drill 4mm holes in the aluminium bars that are 163mm apart

Step 3. Use ur brain and figure out the rest.

I use the shade grip and stealth sights