Mini-3-way blast gate (34mm hoses)

A sized down 3-way blast gate suitable for smaller printers.  Takes 34mm hoses.

Printed on my Ender 3 V3SE and needed some re-work to make blast gate tolerances work smoothly.

Note there are two types of spacers between the blast doors and you will need to print 2 of each (Inner and Outer spacers).

You will need 8 x M3 x 10mm cap screws to assemble it all.  Main mounting holes are 4mm.

The rest is relatively self explanatory.

A smaller version to the original model and takes 34mm hose connections.  Otherwise some minor cosmetic changes (counter sunk screws).