Quad Magnetic PTFE Coupler

There were 2 genius ideas I was inspired by. 1 was this by @linearcline the other was https://www.printables.com/model/695848-ptfe-joiner-for-8x3-magnets-and-pc4-m10 I disliked having to have different poles for different connectors so I chose to use the 4 magnet design which aligns automagically and is interchangeable. I added a male thread that works with PC-M10 connectors so you can print your own nuts to match or order some. Put the thread through the dry box and you will have a magnetic coupler that is easy to attach. I also used the magnets at the back which is easier to print and requires no glue at all. Happy Printing!

There were 2 genius ideas I was inspired by. 1 was this by @linearcline the other was https://www.printables.com/model/695848-ptfe-joiner-for-8x3-magnets-and-pc4-m10 I disliked having to have different poles for different connectors so I chose to use the 4 magnet design which aligns automagically and is interchangeable. I added a male thread that works with PC-M10 connectors so you can print your own nuts to match or order some. Put the thread through the dry box and you will have a magnetic coupler that is easy to attach. I also used the magnets at the back which is easier to print and requires no glue at all. Happy Printing!