Tall Can Dispenser Honeycomb Pattern - 12oz

This is designed to fit 6 cans and stack on top of itself.  It was designed for 12oz cans at 158mm tall and 58mm in diameter.  It should fit others pretty well.  If you want a different width, just scale the foot length appropriately.

I print on two plates using my X1C with 0.28mm first layer and 0.2mm for the remaining layers. No supports are required.  A brim is probably a good idea though.

The feet should fit pretty snugly.  A dab of super glue may be needed to hold things together.