Lenovo ThinkCenter Tiny Wall Mount with Shelf
Wall mount with added shelf for power brick. The cable on each end of the power brick runs through the brackets.
7
63
1
401
updated November 16, 2024
Description
PDF- NOTE: you may have to scale this 2540 in your slicer to convert from inches/mm.
- Prints with no supports on my Mk3S+ using PETG with the Generic PETG defaults in Prusaslicer.
- I Printed with 0.30 layer height
- I used 3 perimeters with 10% infill and it's still stronger than it needs to be. In the future I'll reduce it to 2 perimeters.
- I have fifteen computers I need to mount in an office. These work great to keep them off the floor where people would kick them around. Also frees up space on the desktop.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Useful modification to an excellent design by @barthez.
I added a notch and shelf supports to store the 65W power brick under the PC.
I also trimmed a bit of extra material from the end to conserve material and speed up the print.
