Skadis Mirka Deros sandpaper holder

This his a Skadis holder for Abranet Sandpaper. Sandpaper usually use with mirka Deros 150mm.  It permit a good holding = 156mm ! The Sandpaper 150 mm are too short for these types of sandpaper.

With hex pattern we use less filament 70g max.

You have in these files with sandpaper size 60 to 1000

You have only sandpaper holder simple

you have one with MIRKA text.

I print these with Black PLA, profile : 0.28mm / 15% infill and only 2 Walls. Use normal support 40° treshold and outer brim.