Templar .. "Filament Painting"

Hello everyone! Before you start witch hunt, calm down. I have Full licence for use Hueforge.

The Poor Fellow-Soldiers of Christ and of the Temple of Solomon, mainly known as the Knights Templar

##################################################################

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA Aurapol Silver Transmission Distance: 0.8
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Brown Transmission Distance: 0.4
PLA 3Dpower Grey Transmission Distance: 1.2
PLA Jamghe White Transmission Distance: 3.2
PLA Aurapol Silver Transmission Distance: 0.8
PLA 3Dpower Grey Transmission Distance: 1.2
PLA PolyTerra Army Red Transmission Distance: 0.3

Swap Instructions:
Start with Silver
At layer #9 (0.48mm) swap to Black
At layer #10 (0.52mm) swap to Brown
At layer #11 (0.56mm) swap to Grey
At layer #15 (0.72mm) swap to White
At layer #25 (1.12mm) swap to Silver
At layer #33 (1.44mm) swap to Grey
At layer #34 (1.48mm) swap to Army Red

##################################################################

If you like my creation leave me a like it can support my other creation.

Enjoy :-)