ESPink Shelf Snap-Fit Box
For ESPink-Shelf-2.13 ESP32 e-Paper board, battery and sensor.
13
50
2
640
updated February 12, 2024
Description
PDFSnap-Fit box for ESPink Shelf Box/Case with battery and temperature or CO2 sensor (optional). No glue or screws needed.
There are 2 main versions of the box:
- Original Box with more inside space
- Box with centered display
Each box has two variants:
- for 6mm thick or less battery (e.g. 1500 mAh)
- for 10mm thick battery (e.g. 2500 mAh)
And you can combine the box with various lids:
| Lid | For Original Box or Box with centered display |
|---|---|
| Solid - without holes | Solid |
| With only Reset Hole | R |
| With only Switch Hole | S |
| With only Grill Vent | G |
| With Reset + Switch Hole | RS |
| With Grill Vent + Reset Hole | GR |
| With Grill Vent + Switch Hole | GS |
| With Reset + Grill Vent + Switch Hole | RGS |
Recommended print with 0.4 nozzle and 0.2 layer height. No support.
You can buy the board here: LaskaKit ESPink-Shelf-2.13 ESP32 e-Paper
Tags
Model origin
The author marked this model as their own original creation.
