Ironman inked - hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Protopasta Scarlet Symphany Transmission Distance: 13
PLA Protopasta Silver Smoke Grey Transmission Distance: 20
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Lava Red
At layer #8 (0.72mm) swap to Steel Grey
At layer #15 (1.28mm) swap to Scarlet Symphany
At layer #18 (1.52mm) swap to Silver Smoke Grey
At layer #19 (1.6mm) swap to Ivory White for the rest.