MK3S Mount for Articulating Base + Fixed Focus Arducam
Description
PDFI took the arm from jstiles and added a male link from Sneaks Raspberry Pi Camera Mount for compatibility with my MK3S.
Because this places the camera on the opposite side of the printer, I had to modify the base for the Arducam to allow it to mount “mirrored”. The dovetail and USB cable notch had to go in the opposite direction from the original, so a simple mirror of the file was not possible.
I have two different Arducam's, the same as jstiles and one with a fixed focus lens (this one: non-affiliate).
I included the version of the case and lid that is compatible with the fixed focus camera as well, as the screw positions confit between the two versions.
I will be making a version with a female link as well, as this seems to be the more common connector on the MK3S Articulating mount.
Model origin
The author remixed this model.
Differences of the remix compared to the original
I took the arm from jstiles and added a male link from Sneaks Raspberry Pi Camera Mount for compatibility with my MK3S.
Because this places the camera on the opposite side of the printer, I had to modify the base for the Arducam to allow it to mount “mirrored”. The dovetail and USB cable notch had to go in the opposite direction from the original.