Steering wheel knob ball (billiard No.8) / koule na volant

This stearing wheel knob is designed for stearing whell with outher diameter 365mm and 25mm diam in cut.

The clamp is printable as a one piece, situated on plate according picture. The ball with pivot is printable on place also. Gap is 0.2mm in both case. 

The lid (number 8) is designed for MMU unit.

For assembly you will need Bolt M8, 2 shims (under nut and under ball) and one M8 nut.

I recommend use PETG or ABS, 0.2 layer, 40% infil.