Vin Bookmark (Mistborn)

A bookmark with the character Vin from the Mistborn series, by Brandon Sanderson. Generated in Midjourney

Check out my profile for more Mistborn and Brandon Sanderson art!

It's 50x150mm, a perfect size for small mass market paperbacks. It's only 1.3mm thick, so you don't have to worry too much about damaging the spine of the book. Although I do recommend not shoving it all the way up into the spine and more centering it on the page, just in case.

Feel free to resize the X and Y but don't change the Z, that'll break it. If you have HueForge, it's best to resize using HF and not the slicer, using the included project file.

If you're printing this as a gift for someone, you can use PrusaSlicer's feature to emboss text on the back of it, to give it a nice personal touch. 0.5mm worked nicely for me

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA Overture White TD: 6.4
PLA Overture Light Gray TD: 1.4
PLA Overture Cement Gray TD: 2.4
PLA Overture Black TD: 0.6

Swap Instructions:
Start with White
At layer #20 (0.92mm) swap to Light Gray
At layer #21 (0.96mm) swap to Cement Gray
At layer #28 (1.24mm) swap to Black for the rest.

You don't need an AMS/MMU for this print, you can do it all through filament swaps. You also don't need to own the HueForge software (tho I highly recommend getting it anyways! It's so fun)