Vin - Mistborn, by Brandon Sanderson

The character Vin from the Mistborn series by Brandon Sanderson. Generated in Midjourney. It was very difficult to get it to generate a mistcloak but I think it turned out pretty well.

For more Mistborn and Brandon Sanderson art, check out my profile!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 2.4
PLA Overture White Transmission Distance: 6.4

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Cement Gray
At layer #9 (0.8mm) swap to White for the rest.
 

You don't need an AMS/MMU for this print, you can do it all through filament swaps. You also don't need to own the HueForge software (tho I highly recommend getting it anyways! It's so fun)

It's 150x150mm, feel free to resize the X and Y but don't change the Z, that'll break it. If you have HueForge, it's best to resize using HF and not the slicer, using the included project file.