Call Me Karizma

A HueForge print of my favorite artist, Call Me Karizma. 

You don't need an AMS/MMU for this print, you can do it all through filament swaps. You also don't need to own the HueForge software (tho I highly recommend getting it anyways! It's so fun)

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm. 

Filaments Used:
PLA Overture White Transmission Distance: 6.4
PLA Overture Light Gray Transmission Distance: 1.4
PLA Overture Cement Gray Transmission Distance: 2.4
PLA Overture Black Transmission Distance: 0.6

Swap Instructions:
Start with White
At layer #16 (0.76mm) swap to Light Gray
At layer #29 (1.28mm) swap to Cement Gray
At layer #33 (1.44mm) swap to Black for the rest.
 

Yes, it goes from light to dark, as opposed to dark to light like most HF prints. This is so his jacket is raised above the background. 

It's 150x150mm, feel free to resize the X and Y but don't change the Z, that'll break it. 

Credit: Base image