Cera-1 Tube End Remix (Clay Printer)
I filled in the places where the 4mm nuts had been. I was having trouble with these parts failing at this point.
6
14
0
195
updated
February 10, 2024
Description
PDFAfter unsuccessfully trying to print with a .4mm nozzle, I found that a .8mm nozzle gave me more strength in the Z direction. Refer to @CNCKitchen on Youtube for demo videos.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Since the 4mm bolts were being held in place by friction, the nuts were unnecessary. I increased strength of the part by eliminating the spaces that accommodated the nuts.
