5015 Blower duct for the Creality Sprite Extruder family.
*Blower in images not included*
You will need:
2 x M3x18 screws to attach the blower
2 x M3x8 screws + washers to attach the to the extruder
Don't forget to adjust the height of the duct so that it is above the nozzle as it will hit any prints otherwise.
THIS CANNOT BE PRINTED IN PLA AS THE DUCT WILL DEFORM/MELT WHEN CLOSE TO THE NOZZLE AND HEATED BED. PETG IS RECOMMENDED.
Please be aware that this model was designed for a generic 5015 blower, so it may not fit every blower.
The author marked this model as their own original creation.
