Eurobox Adapter for Top Plate

Idea

I have a stack of Euroboxes (2x 30x40 cm) on rollers in my workshop. i wanted to put a plate on them nice and secure to use them as an additional work surface.

Printing

Simple and easy print, printed it in PETG, 3 perimeters. Nothing to worry here.

Other parts

You will need screws, I opted for 4x16 mm countersunk screws. I also had to buy a multiplex wooden plate, with 2 cm overhang to each side, so 44x64 cm. I filleted the edges of the plate with a trimmer and treated the wood with a food-grade oil.

Assembly

Quite self-explanatory, mount the brackets to the bottom of the wooden plate with two screws each. Taking care with the measurements and maybe trying it out after each adapter is mounted will result in a snug fit.