Hueforge White Tiger

*In the original text file, ash gray is used instead of silver. I accidentally used silver instead of ash gray. With ash gray the image becomes slightly darker

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Ash Gray
At layer #18 (1.52mm) swap to Jade White for the rest.