HTC Vive HMD Wall Mount Lite

Not so much a remix really as a recreation using http://www.thingiverse.com/thing:1619580 as a template.

I made it a little bit tighter because I had the feeling that with a bit of flex the headset could perhaps push the arms aside and fall out. Also added a slight indentation in the left arm to prevent the system button from being pressed while mounted.

This object can be used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution where you'll need only 3 screws to fasten the entire thing to the wall instead of the 6 needed if you mount every piece separately.

Print instructions

Printer Brand: Prusa

Printer: Prusa i3 MK2

Rafts: No

Supports: No

Resolution: 0.20

Infill: 20%

Notes:

Printed perfectly in PLA using Prusa's default NORMAL settings (with ZHop).

Post-Printing

There are 3 holes for mounting the bracket to the wall. For stand-alone mounting just use the outer 2 holes.

If used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution then you only need to use the center hole.