HTC Vive controller wall mount and charging station

This is a wall mount for an HTC Vive wand. It can also optionally be used a a charging dock at the same time.

It was inspired by the existing wall mount http://www.thingiverse.com/thing:1527199 which is also a remix of http://www.thingiverse.com/thing:1443154 like this one. In both cases I found the original models a bit too clunky for my taste so I wanted to slim it down somewhat. Unfortunately the wall mount didn't come with any designer files so I used the original stand and re-created the wall mount.

It still uses the same plugin parts for the different kinds of Micro USB connectors as the others though (see http://www.thingiverse.com/thing:1443154 for those).

This object can be used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution where you'll need only 3 screws to fasten the entire thing to the wall instead of the 6 needed if you mount every piece separately.

Print instructions

Printer Brand: Prusa

Printer: Prusa i3 MK2

Rafts: No

Supports: No

Resolution: .20

Infill: 20%

Notes:

Printed perfectly in PLA using Prusa's default NORMAL settings (with ZHop).

Post-Printing

The back plate has two holes for fixing the mount to a wall.

If used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution then you only need to use the top hole, otherwise you need to use both holes.