Hellboy Hueforge

Hellboy Hueforge

without base

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm 

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #14 (1.2mm) swap to Jade White for the rest.

with base

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm 

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #16 (1.36mm) swap to Jade White for the rest.