Jar Full of Love

This is my Valentines Day "Jar Full Of Love for You" design. Its a Jar, with X's and O's inside with a heart covered top and little note on the side.

The Note swings freely, and must be placed into the two rope bodies before connecting it fully. The heart top acts as a connecting piece for the rope middle portion.

Print in vase mode for the main jar, and print the jar top in vase mode with 0 for bottom layers so it can slide into the rope top spot. The bottom rope portion has an indention that slips onto the main jar for a snug fit.

Print as many X's and O's as needed to fill the jar or just fill it with something else you desire.

- Designed for standard 0.4mm Nozzles and 0.2mm layer height.
- This model uses no supports for printing.
- This model has been split for easy single-extruder filament coloring.
- This model requires glue for assembly.