Paracord Winder

Update 24/02/2024: Updated the no handle version to include a reinforcement rib as testing showed it was susceptible to breaking if enough stress was applied. Old version has been moved to the Legacy folder.

Update 11/02/2024: Added a version without a handle.

After seeing and printing some other paracord winders out there, I designed one that would work better for me.

Has convenient holes to secure loose ends of the cord, a handle to better facilitate winding/unwinding, and a cutout that allows the end of the cord to come free once you've reached the end of your cord.

Image shows a 50ft/15m length of paracord wrapped on it. The second image is compared to @Phillip's Paracord Winder found here: https://www.printables.com/model/568697-paracord-winder

Printed on a BambuLabs X1C using PolySonic PLA with the following settings:

• 0.4mm nozzle
• 0.2 layer height
• 3 perimeters
• 20% Honeycomb infill

As printed, it uses roughly 37 grams of filament.