Meshtastic Housing for Pole

Housing for mounting antenna and radio directly on pole.

Print with PETG for that weather-resistant housing. Spray the inside of the enclosure and the insert with PRF 202 to make it waterproof.

The inserts for Heltec and RAK are optimized to not require print supports. Both inserts have a holder for a 18650 battery. The T-beam insert has no battery holder as its included on the PCB.

The housing requires some print support for the internal baffle. 

Screw in M3 from the sides using the holes to secure the insert.

Bill of Material

WisBlock Meshtastic Starter Kit or Heltec V3

iPEX to RP-SMA Connector

5.8dBi Fiberglass Antenna

Battery Connector

Hose clamps 50-70mm

18650 li-ion battery

GX16–4 pin aviation contact

M3 10mm hex bolts