Blade Bank and Counter ( 1956 RCA Victor AM Radio )

Now you can track the number of shaves per blade, or properly dispose of used blades with this two-in-one shaving accessory. This blade bank and blade use counter was inspired by the popular vintage radio ( 1956 RCA Victor AM vacuum tube radio ). The tuning dial is used as a counter to track the number of shaves per blade, and the main body is used as a blade bank to safely dispose of those well-used blades. The complete assembly is done with the 3d printed parts only ( there's no need for screws, glues, or any other hardware ). This is a fairly easy print that does not require supports, but due to the small details and tight tolerances, a well-calibrated 3d printer is recommended. Please post your makes. Enjoy

Print Settings

Printer Brand:

Kingroon

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: Duramic 3D PLA+ Gray and Pearl White