Skeletons are coming!

Uhu, October 31st, night, they are coming, oh nooo! They are here everywhere coming out from walls, doors, tables, from everywhere!

Your Halloween night could be full of terror by adding these 3D prints to the walls of your house, inside or outside. Or you can put one on the front door for a perfect invitation for "trick or treat" >:-)

Be creative, give it a try!

Print instructions

You can easily print the parts as single models, slice them with Prusaslicer using plastic with almost any layer thickness.

The models shown in the photos are printed with a 0.3mm layer to get short printing time (the .gcode files are created using this layer thickness setting), but you can slice the .stl files with thinner layers for the best quality, especially if you want to paint them.

You can stick the prints to a surface using double-sided adhesive tape. The two arms have a thin plate at the base, but if you want you could delete it within PrusaSlicer. You could also print the base with black plastic and change the filament to white for the bones.