Fish Tank Aquaponic Bracket

This is a bracket for an aquarium light that integrates the supports for an aquaponic system. The aquaponics are in a 4" (100mm) PVC pipe that sits above the aquarium, allowing the pump to fail-safe, and requiring minimal setup.

The light that I built below is a Philips Hue outdoor lighting system held by fiction into an aluminum C section. The light is attached by a rope and knot running through the printed bracket.

The bracket is attached to the wall with a toggle anchor.

Included are versions that are tessellated (which I printed) and one which isn't. Print this with thick chonky sidewalls for strength. PETG is recommended, but probably not critical.