Nerf heavy SR laser mount

I came up with a quick design to put a laser on a nerf gun for my son.  I used the cheapest laser on amazon, attatched is a photo of the one used.  for mounting hardware i used 10x32 1" bolts with nylon locking nuts.  hole size is alittle large but those were the bolts i had on hand.  for printing i used pla with 4 wall count and 15 % infill, turnd on its flat side no supports needed.  fairly accurate around 20-25ft.  to keep the laser turned on i just used some tape, could desin a slip on collar that keeps the button pushed down.