Ender 3 - X-Axis Pi camera v2 mount + Enclosure, QoL improvements

Okay guys, I've changed my mind on this design. It's a bad one for the v2 camera. The way that the camera housing is designed requires you to squish your camera sensor to get it in the case. It's a bad design and it's caused me to ruin 2 v2 cameras. A much better suggestion is to:

Use the two designs below instead. For the sake of your camera.

original design text follows -

https://www.thingiverse.com/thing:2987719 https://www.thingiverse.com/thing:4244869

remixed from https://thingiverse.com/thing:3147295

I had some issues with the original v2 camera parts, so I made some QoL improvements. I just did this in meshmixer, so if you have any suggestions to improve the design, please feel free to let me know.

Improvements compared to the original v2 parts:

• front face minor change, removed slot so camera can slide in easier
• back face fitment improved
• mount camera cable slot widened 2mm in order to accomodate ribbon cable better.
• mount edited to include a slot for easier installation in case you had issues with the original.