UPDATED: Unifi G4 Doorbell Pro POE Parametric Edge Mount (angled + siding slant)

Parametric model for mounting the Unifi G4 Doorbell Pro POE at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell.

The POE version comes with angled backplates but they can not account for mounting on siding.

I used a 15° viewing angle with a -5° compensation for the siding angle. (included sample STL)

Printed in regular PLA at .2 lay height with cubic infill.  You will need to adjust in your slicer to put the flat side down.

Largely the same with a few updates:

1. The previous model does not fit the newer metal backplate which has a wider internal opening.  The internal opening has been enlarged to fit the new backplate.
2. The new backplate contains a full slot cut-out for the safety screw on both top and bottom.  The hole is enlarged to a slot and mirrored top and bottom.
3. Added the ability to create an additional back angle for mounting on siding.
4. Added the ability to add padding for different viewing angles (play with the parmmeters until you find a model that suits you)