M22x1 to M32x2 Sink Adapter

This model is an adapter that connects a garden hose connector of standard size M32 with 2 mm pitch to a standard size M22 sink thread with a pitch of 1 mm. Use a rubber gasket with an outer diameter of 18 mm inside the adapter to make sure no water escapes from the top. The inner diameter and thickness is not important, however if you want a tried and tired gasket get one that has the following dimensions:

18 mm O.D.

13 mm I.D.

2 mm thickness

Material: PLA or PETG

Supports: Not required

Resolution: 0.2

Infill: 30%