ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts
Description
PDFThis is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to mount.
I did not modify any of the used models, only added support-enforcers and special support-settings (organic where reasonable, otherwise regular snug-support).
Used models:
- ESP32-cam holder by johnyHV | Download free STL model | Printables.com
- Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks | Download free STL model | Printables.com
- Articulating Raspberry PI Camera Mount for 3030 aluminium extrusions on Prusa MK3 by jodo | Download free STL model | Printables.com
- T-slot nut for Prusa MK4 and I3 MK3S and Prusa Mini 30x30 profile by AH - Prusa i3 MK3S+ Kit | Download free STL model | Printables.com
I also flashed my ESP32-Camera with this project and can highly recommend it:
Affiliate link for the ESP32-Camera module on Amazon:
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to mount.
I did not modify any of the used models, only added support-enforcers and special support-settings (organic where reasonable, otherwise regular snug-support).
