Low profile / shorter MK4 LCD display mount supports (R2 version)
Brings the LCD screen closer to the front of the printer frame. Great mod if you have a tight enclosure like DELACK.
6
42
1
331
updated February 7, 2024
Description
PDFThis modded LCD mount brings the LCD 1cm closer to the front of the printer, reducing the depth of the footprint by 1cm. This is a big help if you use something like a DELACK enclosure. Not sure why the standoffs were so long in the first place!
This is the R2 version of these parts: only compatible with v27 or older xLCD.
Here are the R3 version of these parts which are only compatible with v28 or newer xLCD.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Shortened the offset by 1cm. Altered screw hole.
