Narnia Map - hueforge

Narnia map

I might update the profile to add some white, hence for now:

AMS ready but if you want you can print on a single color printer by doing the following filament swaps:

Set the layer height to 0.08mm and a base layer of 0.16mm, only one wall and infill to 100% then:

• Start with black
• Swap to orange at layer 7(0.64mm)
• Swap to beigeat layer 15(1.28mm)
• Swap to white at layer 20(1.68mm)

Happy printing and don't forget to show your creations!