Pentagram Bowl

This is a multicolor print intended to be used with a multicolor compatible printer.

This is a very basic storage dish for keys, coins, paperclips, or really anything else.  I am using mine to store charcoal briquettes for incense.  Please do not store unwrapped food in this dish unless you are using a food safe filament.

It was made in Bambu Studio with a cylinder primitive and an svg pulled from Wikipedia.  You may wish to add some rounded edges or angled walls, but I thought the hard edges played off the sharp angles of the central design quite nicely.

Photos show dish printed on a Bambu Lab A1 with an AMS Lite.
Printed with a 120mm exterior diameter.
Black filament shown is Elegoo.
Red filament shown is Bambu Lab.
0.4mm nozzle with 0.2mm Layer height.
15% infill was used, and is more than enough for this application.