LED Stripes Prusa Enclosure

I designed an easy way to install 10mm LED stripes as lighting for the original Prusa Enclosure.

For every profile, which should get LED light 3 holder and 2 profiles are needed. (I used 24x holder, 16x profile)

In addition 3x M3 nuts ans 3x M3x10mm screws are needed.

The Holder is designed to clamp the profile by tightening.

Also the profile holder can be used for attaching Raspberry Pi cam cable

LED Stripe i used (works with Alexa, Google Assistant and App Control):

https://www.amazon.de/Segmentcontrol-Farbwechsel-Lichtband-Fernbedienung-Funktioniert/dp/B0C5JM4DK4/ref=sr_1_6?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3PS8SRPK9EA98&keywords=wifi+led+strip+5m+rgbic&qid=1707218222&sprefix=wifi+led+stripe+5m+rgbic%2Caps%2C72&sr=8-6

LED Connectore i Used:

https://www.amazon.de/RGB-LED-Streifen-Verbindungs-Set-enth%C3%A4lt%EF%BC%8CLED-Streifen-Jumper-l%C3%BCckenlose-LED-Streifen-Clips-LED-Streifen-Licht/dp/B09LS6MT53/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1H5DR5KWHLFWC&keywords=3-poliges+RGB-LED-Streifen-Verbindungs&qid=1707219125&sprefix=3-poliges+rgb-led-streifen-verbindungs%2Caps%2C72&sr=8-3