Linkable Towel Rack

Ocean Waves Linkable Towel Rack. 

This was designed for rolled towels, and can be linked to as many as you would like. I used wall anchors and screws for added support/strength.

My Print Settings: Keep in mind, I printed with a 0.8mm nozzle. Your settings should be adjusted accordingly if you're using a 0.4mm nozzle. 

Nozzle: 0.8mm

Layer Height: 0.4mm

Walls: 2 (Outside to Inside)

Supports: None

Infill: 20%

This print uses ~60g of filament 100% scale with the settings mentioned above.

Thanks for checking out my designs!