iFi hip-dac 3 mount

Designed based on the hip-dac 3

Print Settings:

• Printer: Bambu Lab A1 | 0.4mm Nozzle
• Filament: Polyterra PLA Charcoal Black | 220C
• Print Bed: Bambu Lab Textured PEI Plate | 55C
• Layer Height: 0.2mm
• Infill: 15%, Adaptive Cubic
• Support: Enabled
• Bed Adhesion: Off

Optional:

• Anti-slip Pad | Mount under the base 

NOTE:

• Original 3MF file is only on Printables.com
• Any other distribution of this model for commerical use is PROHIBITED