Keurig pod holder

A vertical pod holder/dispenser. Holds 4 pods. I made it for a k-supreme plus model that has a metal side. It has magnet cut outs in the back to attach it. Could be used without the magnets. Be careful not to slide the magnets/holder around after mounting. They can scratch. The cutouts are for round pancake magnets, 15mm x 1.65mm.  I put 2 holders on my machine. I could have fit 3. Could be different depending on model.

The bottom of the holder has a concave shape, not flat as you might expect. This was done on purpose to prevent the pods coming out when dropping down. The bottom of the pods themselves are slightly convex and they stay in place better when they hit a concave bottom.

I printed vertically. You can try it horizontal but the arc of the cylinder doesn't print well without supports. The concave bottom comes out a bit rough at 0.2mm layer height but thats what i used. I also used 3 perimeters and 15% infill. See the 3mf for more details.

I added the fusion file in case anyone wants to customize the magnet cut outs. Please don't judge my fusion skills too harshly. I have no CAD training.