All American Sterilizer Power Cable Strain Relief

The power cable on the 50X and 75X desperately needs a strain relief.
2
9
0
93
updated February 14, 2024

Description

PDF

I used shore 95A SainSmart TPU and printed with a 0.4mm nozzle with only 1 perimeter and 10% infill. Thin walls and sparse infill allows it to be flexible and distribute the strain across a larger section of the cable. Experiment if you have a different filament.

The power cable on the All American Sterilizer models 50X and 75X has no strain relief, and the cable experiences unnecessary wear at the cable grip. Print this piece out of TPU, wrap it around and secure it with 2-3 zip ties. During operation, this printed piece will get warm, but not too warm for TPU.



 

Tags



Model origin

The author marked this model as their own original creation.

License