Power Tool & Battery Wall Control / Pegboard Mounts for Milwaukee M12

Straight/Angled tool holders + a quad battery holder for mounting Milwaukee M12 power tools on Wall Control or Pegboard
368
2163
22
11 k
updated June 1, 2023

Description

PDF

Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version with just two holes for mounting. The standard version is easier to print and requires a lot less support material. Honestly when mounted with well nuts they are both very strong.  I have never accidently broken one in years of using them.

There is a small recess for the well nuts such that the holder will be perfectly flush against the panels. This should in theory work for any standard 0.25" hole 1" pattern pegboard as well.

Hardware

Designed for use with these well nuts: https://www.amazon.com/gp/product/B08LCRBS4S
Stock of these is kind of in and out and if you're interested definitely contact https://worthytools.com/ to express your interest.

Use #6-32*1-1/8"L bolts for mounting tool holders. Use #6-32*1-½"L bolts for mounting battery holder. You can potentially use longer bolts if you have your pegboard installed further away from the wall behind it.
https://www.ebay.com/itm/154145272749

I extracted the profile for the battery opening on the battery holder from the model created by IconicJ. It is licensed under the Creative Commons Attribution license and can be found at the following link: https://www.thingiverse.com/thing:2493518/files
The overall shape of the holder and mounting method is entirely different.
Tool holders are completely original.

Print Settings

I printed mine in PETG with 6 perimeters and 30% rectlinear infill. I did angled holders with a variable layer height to decrease the staircase effect at the top. Standard-duty holders can potentially be printed without supports, but I used supports for both anyway to minimize bridging.

Get 25% off CA Filament by using the following link:  http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D

 

Update 12/26/2022

As I see many have just been screwing these into plywood or walls, I uploaded a version specifically without the notches or nubs that will make life easier for you guys.  I also removed the Wall Control specific notches from the standard models and made them into pegboard nubs instead.  This should effectively keep compatibility with both systems with only one set of models.

This was initially designed more specifically for my exact use case, but now it should be more usable for other scenarios as well.  I've also uploaded STEP files with some of the major components involved in the design in order to facilitate remixes if anyone so desires.  Happy organizing to all!

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License