Raspberry Pi 3/4 B+ Case Holder

This model was designed to fit with Stamos' “Raspberry Pi 3/4 B+ Case” which can be found at the link below. With some small modifications this design could also fit other cases of a similar size. 

Link to case: https://www.printables.com/model/24942-raspberry-pi-34-b-case

I designed the holder so I could mount the case to a shelving unit and not worry about the Pi moving around while it ran Octoprint on my printer. I then used the holes with some Zip-ties to connect the model to the shelves. The part is designed with a tight tolerance that allows the Pi Case to fit snuggly but also be removed easily if it needs to be accessed. 

Because of the tight tolerance when printing the scale when may need to be tweaked slightly depending on the accuracy of your printer. I printed with the Generic PLA settings and 0.2 mm layer height on the Orginal Prusa MK3S+. 

Thanks for checking out my design, please let me know if you have any feedback!