3x3 Ø50 mm Spice Box Sorter

Background

I am living with four others where we have accumulated many different spices of the Toro make. Recently I got frustrated by how difficult it was to find the most common ones, so I made this sorting box/holder for the nine most used spices :)

Model description

This box is intended to use for sorting/holding your nine favorite spices that have a dimension of less than 50 mm. I made three through holes ment for mounting a handle (that I am getting made for me from wood). If you prefer the model without holes you can edit the .step file and change the “Krydder” text to something you prefer.

Model dimensions

• Depth: 162 mm
• Width: 162 mm
• Height: 85 mm

Print settings

• Layer height: 0.20 mm
• Infill: 15 %
• Brim: Suggested
• Supports: None

I would suggest printing the model on a printer with a print bed greater than 180 x 180 mm. I experienced quite some warping even though I used a brim.

The .step file for the design is also included, so feel free to tweak the part to your needs. Enjoy!