A simple AirTag holder for a 34mm/35mm/36mm/38mm diameter MTB fork like Rockshox or Fox. If you have a very well calibrated or very true to size printer, the part fits perfectly - like my Prusa Mini :)
My holder has not moved after quite a few thousand kilometers. If it is too loose or too tight, scale it a little.
I used Jet Black Prusament PETG and a layer height of 0.15mm.
For other fork inner sizes, do not be afraid to contact me. Many ask, but 32mm is not possible, because the Airtag is already 32 wide!
The author marked this model as their own original creation.