Guardians of Galaxy vol. 2 - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Control3d Black 
PLA PolyTerra Charcoal Black
PLA+ Sunlu Grey 
PLA ESUN PLA LITE Grey 
PLA+ Esun Bone White 
PLA Control3d White 

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Charcoal Black
At layer #21 (1.76mm) swap to Grey
At layer #27 (2.24mm) swap to Grey
At layer #31 (2.56mm) swap to Bone White
At layer #34 (2.8mm) swap to White for the rest.