BaBo organizer insert Vacuum Pump 4x3 or 5x3 (2 versions)

This insert was designed to hold the electrical vacuum pump from eSUN as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules.

The listed fixations are optional, depending on how much your cable twists up. Up to two fixations can be slide in and out to hold the cable in place so that the drawer does not block.

The eSUN vacuum kit pro can be found here, for example:

https://www.amazon.de/eSUN-Kompression-Speicherbeutel-wiederverwendbare-Feuchtigkeit/dp/B0C2TBYJ3Z/ref=sr_1_5_pp?crid=3AIY6ENSLSXBA&keywords=esun+vakuum+kit&qid=1707774357&sprefix=esun+vak%2Caps%2C109&sr=8-5 

https://www.conrad.de/de/p/aufbewahrungsset-filament-storage-kit-evacuum-kit-pro-2-2799087.html 

Sizes:  

Both inserts have a height of 60mm.

• Size 1:    120 x 90 mm (i.e. 4x3)
  This size can hold 1x vacuum pump, 2x sealing clips
   
• Size 2:   150 x 90 mm (i.e. 5x3)
  This size can hold 1x vacuum pump, 2x sealing clips. 
  In addition there is place for a Power Supply Charger (max. length 82 mm, max. width 22,5 mm)

Printing:

Layer height: 0.2

Supports: No

Brim: No

Material: all

The uploaded example is printed with PLA filament in black matt and grey from “Das Filament”

I would be very happy about a make, a like or a comment!