Indoor key

I didn't have a key for the door to my home office, so I decided to make one! 

It might not be the strongest key, but it gets the job done. Print it with a high infill, around 80% should do, or even higher if you prefer. I'd advise against using the key forcefully; handle it with care, and it should work just fine.

I'm not very knowledgeable about locks, but mine is labeled 'boda414.' Upon searching, I've found many locks that look similar. So, I believe this key might work for more than just 'boda414'; just check if the lock has a square inside, and it should likely work.