Coat Rack Joint Replacement

This is a coat rack joint that I made as the original one broke.

This took me around 1 hour to print and used about 23g of filament. I printed it in grey to match the other original joint.

Measurements:

Although I have made this to fit the dimensions that I measured, If you need one with different dimensions for the bars, feel free to ask, and I will add it here, or remix it to make it fit your coat rack.

The dimension of the vertical bar that it is meant to fit is 22.75 X 22.75mm. The dimension of the horizontal bar is: 23 X 23mm.

The dimensions of the actual joint is: 65.26 X 25.81 X 63.2mm.

Print Settings:

• The files should be already oriented in the correct orientation for printing.
• Supports are required (I used snug support).
• I also recommend using a brim to hold it in place.
• I recommend 100% Gyroid infill as this part needs to be very strong.
• Print Coat Rack Joint v3 as this fits the correct dimensions stated above.

I designed this in TinkerCAD.

I have also posted this on Thingiverse, which you can find here and on Make It Real.

Once again feel free ask me to change the dimensions to fit your coat rack or remix it. Please leave comments suggesting what I could do to make it better or how you found it. Happy Printing!!